T30 Turbidity Meter
A multi beam self compensating process turbidity meter. Fits directly into line using standard fitting or immerse directly into process. No bypass system required.
Hygienic Immersion
Range
0 to 50 through to 0 to 1000 FNU/FTU/NTU (measuring range will vary according to media and particle characteristics).
Self Compensating, Accurate and Repeatable
Quadbeam's T30 series of Turbidity Meters combine both light attenuation and 90° scattered light measurements in a ratio-metric sensor with digital communication.
This technique vastly increases the sensitivity compared to sensors with just light attenuation. The T30 is designed to meet the international standards for turbidity measurement ISO7027.
The T30 has two emitters and two detectors, set at exactly 90° to each other. At each emitter is pulsed in sequence it produces two detector currents, one from the detector opposite the emitter (attenuation) and the other from the detector at 90° to the emitter (scattered light).
Signals from each detector are fed into the microprocessor which calculates the value of turbidity from the ratio of the two emitter/detector pairs.
This ratio-metric signal compensates for variance caused by contamination or component ageing.
Applications
Hygienic
Whey Fines Monitoring
CIP Return
Heat Exchanger Breakthrough Monitoring
Immersion
Final Outlet effluent from DAF plants
Raw Water inlet measurements
Surface Water Monitoring
Monitoring of clarifier overflow weirs
Filter Breakthrough in Mining applications
Data Sheet Here - Full Colour
- Printer Friendly
|
